Upgrade from HP-UX 10.20 to 11.0 64-bit version, use this command: swinstall-x os_name = HP-UX: 64-x os_release = B.11.00 on HP-UX 11.0 32-bit and 64-bit conversion between 11.0 Note: When upgrading to 11.0 or 11.0 of the 32-bit version and 64 for the conversion between versions, and never to use the "-x allow_incompatible = true" option. If you use this option, he may cause the upgrade failure and the system may not start. In the 32-bit and 64-bit 11.0 11.0 conversion between, use the following steps: 1. Into a new version of SD, as you are upgrading from 10.x same. Note: See "New Version Required" on page 13. 2. With the appropriate options-x os_name and-x os_release to run swinstall, and specify the-x reinstall = true and-x reinstall_files = true. For example, 11.0 32 11.0 64-bit upgrade.
Abit I-45C with Intel 945GC + ICH7 chipset, ABIT I-45C is a used Intel 945GC + ICH7 chipset products to the current Intels Core series of Core 2 Duo, Pentium Dual-Core and PentiumD, Pentium4 processors such CeleronD support, and support Hyper-Threading technology. Compared with traditional products, ABIT I-45C to provide the highest FSB 1333MHz front side bus support, backwards compatible with 1066MHz, 800MHz, 533MHz of FSB. Abit I-45C in the memory also is optimized to support adjustments, it has two 240pin DIMM memory slots, but in the memory capacity to support capacity are able to reach incredible 4GB. For the average user, the capacity of such a luxury, but also reflects the limits of ABIT constantly challenge themselves and challenge the spirit. Specification to support capacities in the Memory, ABIT I-45C motherboard supports DDRII667, DDRII533 and DDRII400 memory size, is the most cost-effective as a kind of memory, can reduce the cost of the computer set up, the idea of the cost in the end.